WELD X52 ERW/HFW Stahlrohr
Basisinformation
Modell: 24-48"
Produktbeschreibung
He Bei GuangHao Pipe Fittings Co., LTD Spezialisiert auf die Herstellung von Stahlrohren und Rohrfittings
Hauptproduktion: Wärmeschutz-Korrosionsschutzrohr, nahtloses Rohr, ERW / HFW-Stahlrohr, LSAW- STAHLROHR , Spiralrohr , stumpfgeschweißte Stahlrohrfittings, Industrieflansche, Stahlrohre, Schweißrohrbögen, Schweißrohr-T-Stücke, geschmiedete Fittings usw.
Willkommen zu diskutieren
Geschmiedete Fittings/Buttweld Steel Fittings Typ: Bogen, Kreuz, Straßenbogen, T-Stück, Kupplung, Halbkupplung, Kappe, Stopfen, Buchse, Anschluss, Auslass, Salbeinippel, Bull Stopfen, Reduziereinsatz, Rohrnippel usw.
- Spezifikation:
- 1. Außendurchmesser: 508 mm - 812,8 mm (20 "-32")
- 2. Dicke: 4,0-38,1 mm
- 3. Länge: 3m-35m
- 4. Typ: ERW-Stahlrohr (Electric Resistance Welded), HFI-Stahlrohr (Hochfrequenzinduktion), HFW-Stahlrohr (Hochfrequenzschweißen)
- 5. Standard: API 5L (ISO 3183) PSL1/PSL2: GR.B-X80, GB/T 9711.1, GB/T 9711.2, ASTM A53: GR.A/GR.B, ASTM A500: GR.A/GR. B/GR.C/GR.D, ASTM A252: GR.1/GR.2/GR.3, EN10219/EN10210: S275/S355JRH/J0H/J2H, AS/NZS 1163
- 6. Verwendung: Geschweißte Stahlrohre für den Einsatz in Pipeline-Transportsystemen in der Erdöl- und Erdgasindustrie (Öl & Gas), Wasserleitung, Bau und Bau.
- 7. Chemische Analyse (%):
Chemische Zusammensetzung für PSL 1-Rohr mit t ≤ 0,984”
Steel Grade | Mass fraction, % based on heat and product analyses a,g | ||||||
---|---|---|---|---|---|---|---|
C | Mn | P | S | V | Nb | Ti | |
max b | max b | max | max | max | max | max | |
Seamless Pipe | |||||||
X52 | 0.28 | 1.4 | 0.3 | 0.3 | d | d | d |
Welded Pipe | |||||||
X52 | 0.26 | 1.4 | 0.3 | 0.3 | d | d | d |
Chemische Zusammensetzung für PSL 2-Rohr mit t ≤ 0,984”
Steel Grade | Mass fraction, % based on heat and product analyses | Carbon Equiv a | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
C | Si | Mn | P | S | V | Nb | Ti | Other | CE IIW | CE Pcm | |||||||||||
max b | max | max b | max | max | max | max | max | max | max | ||||||||||||
Seamless and Welded Pipe | |||||||||||||||||||||
X52N | 0.24 | 0.45 | 1.4 | 0.025 | 0.015 | 0.1 | 0.05 | 0.04 | d,e,l | 0.043 | 0.25 | ||||||||||
X52Q | 0.18 | 0.45 | 1.5 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e,l | 0.043 | 0.25 | ||||||||||
Welded Pipe | |||||||||||||||||||||
X52M | 0.22 | 0.45 | 1.4 | 0.025 | 0.015 | d | d | d | e,l | 0.043 | 0.25 | ||||||||||
a. SMLS t>0.787”, CE limits shall be as agreed. The CEIIW limits applied fi C > 0.12% and the CEPcm limits apply if C ≤ 0.12%, b. For each reduction of 0.01% below the specified max. concentration for carbon, and increase of 0.05% above the specified max. concentration for Mn is permissible, up to a max. of 1.65% for grades ≥ B, but ≤ = X52; up to a max. of 1.75% for grades > X52, but < X70; and up to a maximum of 2.00% for X70., c. Unless otherwise agreed Nb = V ≤ 0.06%, d. Nb = V = Ti ≤ 0.15%, e. Unless otherwise agreed, Cu ≤ 0.50%; Ni ≤ 0.30% Cr ≤ 0.30% and Mo ≤ 0.15%, f. Unless otherwise agreed, g. Unless otherwise agreed, Nb + V + Ti ≤ 0.15%, h. Unless otherwise agreed, Cu ≤ 0.50% Ni ≤ 0.50% Cr ≤ 0.50% and MO ≤ 0.50%, i. Unless otherwise agreed, Cu ≤ 0.50% Ni ≤ 1.00% Cr ≤ 0.50% and MO ≤ 0.50%, j. B ≤ 0.004%, k. Unless otherwise agreed, Cu ≤ 0.50% Ni ≤ 1.00% Cr ≤ 0.55% and MO ≤ 0.80%, l. For all PSL 2 pipe grades except those grades with footnotes j noted, the following applies. Unless otherwise agreed no intentional addition of B is permitted and residual B ≤ 0.001% . |
Mechanische Eigenschaften
Pipe Grade | Tensile Properties – Pipe Body of SMLS and Welded Pipes PSL 1 | Seam of Welded Pipe | ||
---|---|---|---|---|
Yield Strength a | Tensile Strength a | Elongation | Tensile Strength b | |
Rt0,5 PSI Min | Rm PSI Min | (in 2in Af % min) | Rm PSI Min | |
X52 | 52,200 | 66,700 | c | 66,700 |
Hydrostatischer Test
Rohr, um einen hydrostatischen Test ohne Leckage durch die Schweißnaht oder den Rohrkörper zu überstehen. Muffen müssen nicht hydrostatisch geprüft werden, wenn die verwendeten Rohrabschnitte erfolgreich geprüft wurden.
Biegetest
In keinem Teil des Prüfstücks dürfen Risse auftreten und es darf keine Öffnung der Schweißnaht auftreten.
Abflachungstest
Akzeptanzkriterien für die Abflachungsprüfung sind:
- EW-Rohre D<12.750 in:
- X60 mit T 500in. Die Schweißnaht darf sich erst öffnen, wenn der Plattenabstand weniger als 66 % des ursprünglichen Außendurchmessers beträgt. Für alle Grade und Wand, 50%.
- Bei Rohren mit D/t > 10 darf die Schweißnaht erst dann geöffnet werden, wenn der Plattenabstand weniger als 30 % des ursprünglichen Außendurchmessers beträgt.
- Weitere Größen finden Sie in der vollständigen API 5L-Spezifikation.
Produktgruppe : Stahlrohr > ERW / HFW Stahlrohr